Complementary assortment for our Security Locks.
Content: (ArtNo., pieces, article)
Spare parts are also available in Ruthenium, SatinPearl and VintageCopper on request.
| Model | ArtNo. | Weight g/item | Model | Surface | Finish | Model |
|---|---|---|---|---|---|---|
|
445-6 | 630 | Assortment | All | Polished | Buttons, Screws |
To view the complete user instructions, please use the download file.
Note: Acrobat Reader is required to view PDF files correctly!
These Schaller Security Locks are an example of the subtle differences between various surface finishes.
   | ||
| NI-Nickel | CH-Chrome | SC-SatinChrome |
   | ||
| BC-BlackChrome | GO-Gold | RU-Ruthenium |
  | ||
SP-SatinPearl | VC-VintageCopper | |
To view a larger image of a product with each finish, click on the desired product in the "Versions" tab in the product catalog, and then switch to the "Description" tab. The image shown here can then be enlarged by clicking on it.
All measurements in the product catalogue are given in mm (inch), unless a different unit of measurement is stated.
We do not accept any liability for the correctness of the technical drawings. Prior to installation, please measure for yourself once more, so you can consider regular manufacturing tolerances.
Please note that the technical data can also vary slightly, depending on the surface color. This is due to the difference in the galvanic coating and the galvanic layering, which depends on the color (nickel, chrome etc).
The technical drawings can be printed on one page width. Should the technical drawings not fit on one page, however, please check your print page setup (note: they can be several pages long).
From time to time, the measurements given in the file downloads on our website may differ from those given in the catalogue. Please bear in mind that the measurements given in the online downloads are current. Any discrepancies will be corrected when the catalogue is updated.
Our screw dimensions are suitable for the majority of guitars such as Fender, Gibson, PRS etc. Unfortunately, it goes without saying that we cannot develop an individual security lock for every possible individual case. A larger screw alone will not suffice, as the base and the lock must also be suitably enlarged at the same time.
A method that has proved appropriate for achieving this is to fill the existing screw hole with an epoxy resin before drilling a new hole of the appropriate size. Never drill at the base to enlarge the hole for a larger screw, as doing so will void any warranty.
A detailed installation drawing can be found under "Guidelines".
Theoretically yes, but you must screw our security locks into the frame reinforcement and not into the open frame. You can then also use our Schaller security locks on your acoustic guitars without any problems.
A detailed installation drawing can be found under "Guidelines".
You simply need to pull on the ball located above the screw thread. This releases the lock from the strap button so that you can remove the strap from the guitar. When you let go of the ball, the locking cylinder will snap securely back into the strap button.
A detailed installation drawing can be found under "Guidelines".
